Porous titanium plate for gas diffusion layer in hydrogen production electrolyzers

I. Introduction:

Northwest Hydrogen Electrolyzer Gas Diffusion Layer Porous Titanium Plate Titanium Foam is a micro-filtration element made from industrial high-purity titanium powder (99.4%) through processes such as sieving, molding, and sintering. Titanium powder sintered filtration materials, due to their high-tech material composition and special molding process, possess unique and excellent properties.
II. Detailed Introduction:
Titanium sintered porous titanium plate is a new type of high-efficiency porous filtration material made from industrial high-purity titanium powder (99.4%) through processes such as powder classification, molding, sintering, and mechanical welding. Because its pore size and filtration accuracy can be adjusted over a wide range, it is widely used in the pharmaceutical industry, water treatment industry, food industry, bioengineering, chemical industry, petrochemical industry, metallurgical industry, and gas purification fields. It is a new filtration material with broad development prospects.
III. Northwest Hydrogen Electrolyzer Gas Diffusion Layer Porous Titanium Plate Titanium FoamFiltration Principle:

Titanium powder sintered filtration material is a porous titanium metal filtration material produced using powder metallurgy methods. Its internal pores are curved, interwoven, and uniformly distributed, with a filtration mechanism typical of deep-bed filtration.
IV. Main Properties:
1. Uniform pore size, stable pore shape, and high separation efficiency.
2. High porosity, low filtration resistance, and high permeability efficiency.
3. High temperature resistance, can be used normally at temperatures below 250°C.
4. Good chemical stability, resistance to acid and alkali corrosion (pH 2-12), and oxidation resistance.

5. No particle shedding, does not cause secondary contamination of the original liquid, complies with food hygiene and pharmaceutical GMP requirements.

6. Good mechanical properties, low pressure drop, high flow rate, suitable for pressure filtration and suction filtration, simple operation.
7. Strong resistance to microorganisms, does not interact with microorganisms.